Titanium-base series :Ti
(Gr.2 , Gr.3, Gr.5, Gr.7...)
Nickel-base series: Monel
400/ Monel 500..
Inconel 600/625/690/750.....
Incoloy
800/825/800H/800HT.....
Hastelloy
B3/C/C4/C22/C276/G30....
Zirconium -base series: Zr
702/703/705...
Duplex stainless steel: ASTM
F51/F55...
Other corrosion
resistance/high temperature
resistance alloy:Alloy 20,
AISI 321, AISI 310, 904L...
Other material is not
listed, please call us!
锻钢闸阀
Haitima forged steel gate
valves are available in
three bonnet designs. The
first design is the Bolted
Bonnet, with male-female
joint, spiral wound gasket,
made in F304/graphite. Ring
joint gasket are also
available on request. The
second design is the welded
bonnet with a threaded and
seal welded joint. On
request a full penetration
strength welded joint is
available. The third design
is the pressure seal bonnet,
with a threaded and pressure
seal bonnet joint.
Gate
valve Design construction
and Specification.
Haitima gate valve conform
to API602, BS5352 and ASME
B16.34. Each are tested
according to API598, and
marking is per MSS SP-25.
Bolted
Bonnet
Welded
Bonnet
Pressure Seal Bonnet
Construction is as follows:
Full
port or Conventional port
OS&Y, Outside screw and Yoke
Two piece self aligning
packing gland Bolted
bonnet with spiral-wound
gasket, threaded and seal
welded bonnet or threaded
and pressure seal bonnet.
Integral backseat Socket
weld end to ASME B16.11
Screwed ends (NPT) to
ANSI/ASME B 1.20.1
锻钢截止阀
Haitima forged steel globe
valves are available in
three bonnet designs. The
first design is the Bolted
Bonnet, with male-female
joint ,spiral wound gasket,
made in F304/graphite. Ring
joint gasket are also
available on request. The
second design is the welded
bonnet with a threaded and
seal welded joint. On
request a full penetration
strength welded joint is
available. The third design
is the pressure seal bonnet,
with a threaded and pressure
seal bonnet joint.
Globe valve Design
construction and
Specification.
Haitima globe valve conform
to API602, BS5352 and ASME
B16.34. Each are tested
according to API598, and
marking is per MSS SP-25.
Bolted
Bonnet
Welded
Bonnet
Pressure Seal Bonnet
Construction is as follows:
Full port or Conventional
port OS&Y, Outside screw
and Yoke Two piece self
aligning packing gland
Bolted bonnet with
spiral-wound gasket,
threaded and seal welded
bonnet or threaded and
pressure seal bonnet.
Integral backseat ASME
B16.11 Socket weld end to
ASME B16.11 Screwed ends
to ANSI/ASME B 1.20.1
The disc can transfer valve
to be throttle valve, needle
valve, ball valve and check
valve.
Haitima forged steel check
valves are available in
three bonnet designs. The
first design is the Bolted
Bonnet, with male-female
joint, spiral wound gasket,
made in F304/graphite. Ring
joint gasket are also
available on request. The
second design is the welded
bonnet with a threaded and
seal welded joint. On
request a full penetration
strength welded joint is
available. The third design
is the pressure seal bonnet,
with a threaded and pressure
seal bonnet joint.
Check valve Design
construction and
Specification.
Haitima Check valve conform
to API602, BS5352 and ASME
B16.34. Each are tested
according to API598, and
marking is per MSS SP-25.
Bolted Bonnet
Welded Bonnet
Pressure Seal Bonnet
Construction is as follows:
Full
port or Conventional port
OS&Y, Outside screw and Yoke
Two piece self aligning
packing gland Bolted
bonnet with spiral-wound
gasket, threaded and seal
welded bonnet or threaded
and pressure seal bonnet.
Integral backseat ASME
B16.11 Socket weld end to
ASME B16.11 Screwed ends
to ANSI/ASME B 1.20.1
The
disc can transfer valve to
be throttle valve and needle
valve..
Haitima Y-Pattern valves are
available in three bonnet
designs. The first design is
the Bolted Bonnet, with
male-female joint, spiral
wound gasket, made in
F304/graphite. Ring joint
gasket are also available on
request. The second design
is the welded bonnet with a
threaded and seal welded
joint. On request a full
penetration strength welded
joint is available. The
third design is the pressure
seal bonnet, with a threaded
and pressure seal bonnet
joint.
Check valve Design
construction and
Specification.
Haitima Y-Pattern valve are
available in globe and check
design configurations.
Bolted Bonnet
Welded Bonnet
Pressure Seal Bonnet
Construction is as follows:
Full
port or Reduced port
Piston and ball check
Spring available on request
Loose
solid disc Two piece
self-aligning packing gland
Integral back seat
Outside screw and Yoke
(OS&Y)
Bolted
bonnet with spiral-wound
gasket, threaded and seal
welded bonnet or threaded
and pressure seal bonnet
Socket
weld End to ASME B16.11
Screwed End (NPT) to
ANSI/ASME B1.20.1
The
disc can transfer valve to
be throttle valve, needle
valve, ball valve and check
valve.
Haitima forged steel
integral flanged end valves
are available in three
bonnet designs. The first
design is the Bolted Bonnet,
with male-female joint,
spiral wound gasket, made in
F304/graphite. Ring joint
gasket are also available on
request. The second design
is the welded bonnet with a
threaded and seal welded
joint. On request a full
penetration strength welded
joint is available. The
third design is pressure
seal bonnet, with a threaded
and pressure seal joint.
Integral flanged end valves
are available in gate,
piston check , and swing
check design configurations.
Haitima bellow sealed valve
conform to API602,
MSS-SP-118 (AS APPLICABLE),
BS 5352 and ANSI B16.34.
Each are tested according to
API598 and marking is per
MSS SP-25.
Flanged end Globe
Valve
Flanged end Gate
Valve
Flanged end Check
Valve
Construction is as follows:
Full
port and conventional port.
ANSI B16.10 face to face
according to ANSIB 16.10
ANSI B16.5 F16.5 flanges
according to ANSIB16.5
Pressure seal bonnet
Outside screw and yoke.
Two piece self-aligning
packing gland.
Integral body flanges
ASMEB16.25 Butt welding end
to ASME B16.25
RTJ body bonnet gasket ring
joint type.
Bolted bonnet with
spiral-wound gasket,
threaded and seal welded
bonnet or threaded and
pressure seal bonnet.
HAITIMA Corporation.